Artesis system is simple to install and requires little user intervention in operation, it combines low start-up costs with the significant benefits of predictive maintenance. Since it doesn’t require any sensor installation on the equipment itself, and it can be installed in non-EX areas, Artesis e-MCM is a particularly good solution for inaccessible equipment in the automotive industry.
Why Artesis?
A very important factor in the production of pharmaceuticals is controlling environmental parameters such as temperature, humidity and airflow rate. Monitor the air handling units with Artesis technology to ensure the levels of these parameters are controlled according to requirements. This includes monitoring the supply and extraction fans with the motors that drive them. Also, this monitoring technology allows monitoring any load increase due to leakage of hot water or steam used for heating, and/or leakage of chilled water used for cooling and air conditioning systems. Of course, monitoring gas boilers or gas turbines, boiler feed pumps, ID/FD fans and related support equipment used in those systems is also possible and recommended.
Although sometimes ignored due to size and number in the production line, small pumps and motor-driven mixers and agitators from the batch reactors can result in a batch lost due to a failure that could be prevented. Artesis simplifies the work of monitoring these machines without the need of introducing wiring and equipment or sensors in direct contact to the line. Also, monitor any conveying systems to make sure the manufacturing process runs smoothly from one station to the other. For the manufacturing process, there is more service equipment needed, such as water for injection systems and deionized water systems. Monitor feeding and supply pumps running within these systems with Artesis monitoring units and remember you will be able to detect both mechanical and electrical problems, including misalignment, loose foundation, bearing faults, load fluctuations, among others.